General HPLC Accessories
Waters Corp Waters Method Validation Kit, 130Å, 2.5 μm, 4.6 mm X 150 mm
This XSelect CSH Fluoro-Phenyl method validation kit includes three columns packed with different sorbent batches, designed to maximize selectivity differences. It offers method development freedom, particularly with low pH mobile phases, and its non-encapped sorbent enhances retention of acidic compounds. These 2.5 μm eXtended Performance [XP] columns provide robust separation performance for HPLC assays and enable a smooth transition to UPLC.
- Dimensions: 4.6 mm (Inner Diameter) × 150 mm (Length)
- Particle size: 2.5 μm, pore size: 130 Å
- Chemistry: PFP/Fluoro-Phenyl, separation mode: Reversed Phase
- pH range: 1 to 8, maximum pressure: 10000 psi (690 Bar)
Waters Corporation XBridge BEH HILIC Method Validation Kit, 130Å, 2.5 μm, 2.1 mm X 150 mm
Waters Corporation XBridge BEH HILIC Method Validation Kit, 130Å, 2.5 μm, 2.1 mm X 150 mm
Waters Corp Oasis HLB Method Validation Kit, 30 μm Particle Size
The Oasis HLB Method Validation Kit is designed to facilitate the rapid development of solid-phase extraction (SPE) methods for LC-MS analysis. It utilizes Oasis HLB, a multi-purpose, reversed-phase sorbent, which provides high capacity for a broad spectrum of compounds.
- Designed for rapid development of SPE methods for LC-MS analysis.
- Useful for identifying effective methods to isolate unknown analytes, zwitterionic compounds, or analyte mixtures with varied retention and elution characteristics.
- Sorbent is water–wettable.
- Sorbent is stable across a pH range of 0–14.
- Sorbent is free from silanol interactions.
- 30 μm particle size sorbent is recommended for extracting most plasma, serum, and human urine samples.
Waters Corp CORTECS HILIC Method Validation Kit, 1.6 μm, 2.1 x 30 mm, 3/pk
This CORTECS HILIC Method Validation Kit is engineered to evaluate the quality, reliability, and consistency of analytical methods. It ensures batch-to-batch and column-to-column reproducibility, providing confidence in the continued use of methods. This kit contains three columns from three batches of material, with a particle size of 1.6 μm and dimensions of 2.1 × 30 mm.
- Designed to evaluate quality, reliability, and consistency of an analytical method.
- Includes three batches of chromatographic media derived from different base particles.
- Ensures batch-to-batch and column-to-column reproducibility.
Waters Corp CORTECS C8 Method Validation Kit, 90à , 2.7 µm, 2.1 mm X 30 mm, 3/pk
CORTECS C8 Method Validation Kit, 90à , 2.7 µm, 2.1 mm X 30 mm, 3/pk
Waters Corp HPLC Column, BioResolve SCX mAb, 3 μm, 2.1 x 100 mm, MVK
The BioResolve SCX mAb column features corrosion-resistant columns with non-porous, polymer-based particles grafted with a meticulously optimized, multi-component network of negatively charged sulfonic acid ligands. This innovative column technology provides reproducible, high-resolution, charge-based separations of mAbs and other proteins in both LC and LC-MS applications using robust salt or pH gradient methods. It also includes VanGuard™ Fully Integrated Technology (FIT) which extends column life without compromising biomolecule component resolution.
- BioResolve column
- Cation exchange
- 2.1 mm inner diameter
- Reversed phase (RP) mode
- 3.0 μm particle size
- 3 to 11 pH range
- 100 mm length
Waters Corp Method Validation Kit, Shield RP18, 90Å, 1.6 μm, 2.1 mm X 150 mm, 3/pk
CORTECS Shield RP18 method validation kits offer complementary selectivity to C8 and C18 stationary phases. Featuring an embedded carbamate group, they provide alternate selectivity for phenolic compounds. The solid-core particle morphology ensures high efficiency and lower backpressures.
- Complementary selectivity to C8 and C18 stationary phases
- Alternate selectivity for phenolic compounds due to embedded carbamate group
- Solid-core particle morphology for high efficiency and lower backpressures
- Balanced retention of acids, bases, and neutrals at low and mid-range pH
- Excellent peak shape for basic analytes
- Chemistry: C18, Reversed phase
- pH range: 2 to 8 pH
- Maximum pressure: 18000 psi (1240 Bar)
- Particle size: 1.6 μm
- Pore size: 90 Å
- Dimensions: 2.1 mm ID x 150 mm Length
- Units per package: 3 pk
Waters Corp CORTECS Phenyl Method Validation Kit, 90Å, 2.7 μm, 3 x 50 mm, 3/pk
CORTECS Phenyl method validation kits offer columns from three distinct batches. These columns provide complementary selectivity to C18 stationary phases. Their particle morphology delivers high efficiency and lower backpressures compared to fully porous particles of similar size. The columns also ensure ultra-low column MS bleed, long lifetimes, and excellent peak shape.
- Provides columns of three different batches for method validation.
- Offers complementary selectivity to C18 stationary phases.
- High efficiency and lower backpressures due to particle morphology.
- Ultra-low column MS bleed.
- Long lifetimes.
- Excellent peak shape.
Waters Corp Beverage Analysis Standards, High Level, 250 mg/L Caffeine, 100 mL
These High Level Beverage Analysis Standards provide a 100 mL solution of caffeine (250 mg/L) and acesulfame-K (250 mg/L). Designed for high-caffeine beverages like energy drinks, they are crucial for LC-MS system calibration to increase quantitation precision and accuracy, ensuring proper equipment function for precise analysis before experiments.
- Separation mode: Reversed phase
- Detection method: UV
- Liquid formulation for room temperature storage and ambient shipping
- Designed for LC systems and quantitative analysis
- Shelf life of 12 months
- Volume: 100 mL
- Type: Calibration standards
- Application: System calibration for beverages with high caffeine content
- Increases precision and accuracy of quantitation
- Supports detection before experiments
- Useful for cleaning and benchmarking LC-MS equipment performance
Waters Corp UPLC HILIC Column Method Validation Kit, 1.6 μm, 90 Å, 2.1 × 150 mm
The CORTECS UPLC HILIC Column Method Validation Kit is designed to evaluate the quality, reliability, and consistency of an analytical method. It includes three columns from three different batches of material to ensure batch-to-batch and column-to-column reproducibility.
- Optimized for UltraPerformance Liquid Chromatography (UPLC).
- Utilizes sub-2 μm solid-core particle technology.
- Ensures reproducibility of chromatographic performance.
- Kit contains three columns from three batches of material.
Waters Corp CORTECS T3 Method Validation Kit, 120à , 2.7 µm, 4.6 mm X 100 mm, 3/pk
CORTECS T3 Method Validation Kit, 120à , 2.7 µm, 4.6 mm X 100 mm, 3/pk
Waters Corp XSelect CSH Fluoro-Phenyl Prep Guard Cartridge, 130Å, 5 μm, 30 mm × 10 mm
This 30×10 mm Prep Guard Cartridge, in conjunction with the 30×10 mm Prep Guard Holder, is designed to protect both HPLC and SFC 30 mm ID Prep OBD™ columns. Placing this guard assembly ahead of the prep column is intended to extend column lifetimes and decrease purification costs.
- Designed to safeguard HPLC and SFC 30 mm ID Prep OBD™ columns
- Extends column lifetimes and diminishes purification costs
- Chemistry: PFP/Fluoro-Phenyl
- Separation mode: Reversed phase
- Particle substrate: Hybrid
- pH range: 1 to 8
- Maximum pressure: 6000 psi (415 bar)
- Particle size: 5 μm
- Pore size: 130 Å
- Inner diameter: 30 mm
- Length: 10 mm
- Units per package: 1
Waters Corp Method Validation Kit, CORTECS C18+, 90 Å, 2.7 μm
This Method Validation Kit features CORTECS C18+ phase with a 90 Å pore size, 2.7 μm particle size, and 3 x 30 mm column dimensions, ideal for robust method development and validation.
- Method validation kit type
- CORTECS C18+ phase
- 90 Å pore size
- 2.7 μm particle size
- 3.0 mm ID
- 30 mm length
- C18 phase type
- USP L1 compliant
